How to fix ghosting on a laser printer?

When it comes to printing some of your important documents within the workplace. But one of the most frustrating issues that could easily occur comes in the form of laser printer ghosting. This is an issue that clearly can happen with the laser printers when the documents are being printed yet the toner on the physical copy produced is much lighter in appearance and in less detail than the digital file. The printers that show the sign of ghosting that are more commonly older machines, new printers are also shown some of these problems. In this article, you will get to learn the basics to fix the laser printer ghosting error. So, let us get started!

fix ghosting on a laser printer

What Is Printer Ghosting?

The Ghost prints error happens when the drum or the fuser unit that is within the printer becomes faulty. Because a fault with this element won’t heat the particles of the toner to raise the temperature and the marks being made on the paper that are much lighter in color and appear more faded than typical documents.

What causes a ghosted image on a printout?

Ghost printing is one of the common reasons for the people who think that their printers or device is broken, but indeed are receiving a laser printer ghosting error. It can also happen for different reasons and it can often be repaired by replacing the simple parts of the machine. The Ghost prints happen when the drum or fuser unit within your printer becomes faulty. Because a fault with this element won’t heat the particles of the toner to a high enough temperature the marks being made on the paper.

How to find a ghost print?

Because the quality of the printed documents can get worsen over the period time, it may be very much difficult to spot the signs of ghosting. However, you can easily check if the printer is not up to the standards that refer to the printer manual. There are many of these documents that will contain a diagnostic ruler that you can use to compare your printed items to a generic machine.

What are the steps to fix laser printer ghosting errors?

In order to fix the hp color laserjet cp5225dn printer with ghost-white toner, you have to follow the steps that are given in this section. Ghost printing happens when there is an image or text is repeated more than once on the printed page. This is often caused by an issue with the drum unit, which is clearly an electrically charged cylinder that just transfers the toner powder on the paper. There can be an issue with the fuser, that is responsible for heating the toner powder onto the page. There are some of the troubleshooting techniques worth trying that should fix:

  1. First of all, you can check your printer’s environment.
  2. Just make sure that you are using the right paper to go onto the tray.
  3. After this, you need to adjust the paper setting.
  4. Now, you have to run a cleaning.
  5. Inspect the drum.
  6. Remember, if the drum unit does not appear to be the issue, you can try to clean the fuser or you may even need to replace the fuser altogether.
  7. Just make sure you follow each step carefully on the screen to complete the process.

In a conclusive viewpoint: 

By the end of this topic, we hope that you are now clear about fixing up the laser printer ghosting error. However, if you are still stuck between the steps that are given in this article then you are suggested to visit the HP support website and get your queries resolved within no time.

Add a Comment

Your email address will not be published. Required fields are marked *

Reload Image